7205 Nachi Angular Contact Bearing 25x52x15 Steel Cage C3 Japan Ball Bearings

The Nachi 7205 single-row angular contact ball bearing is an open bearing and has a 30-degree contact angle, pressed steel cage, and C3 clearance rating. It supports moderate one-directional thrust loads, and combined radial and thrust loads where the thrust load is predominant. The 7200 series has a smaller cross section than the 7300 series, making it suitable for smaller spaces, lighter loads, and higher speeds. This bearing is made of low-alloy, through-hardened carbon chromium steel for durability and resistance to deformity under heavy loads. The 30-degree contact angle of the balls in relation to the raceways gives the bearing a greater capacity for supporting thrust loads over bearings with a standard contact angle of zero degrees. Its open design facilitates lubricating the bearing in place and dissipating heat. This bearing has a pressed steel cage to prevent the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The bearing has a C3 axial internal clearance designation to indicate that the axial slack between the inner and outer rings is greater than the standard CN (normal) clearance. It allows for thermal expansion as the bearing supports radial loads and its balls, operating in the deep raceway geometry, reduce rotational friction. Additionally, this bearing is produced to normal tolerances in accordance with International Organization for Standardization (ISO) 492:2002 standards for quality assurance. This angular contact ball bearing is for use in commercial and industrial applications including pumps and compressors, automotive drives, gearboxes, and printing machines, among others.Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.Nachi-Fujikoshi manufactures bearings, cutting tools, hydraulic equipment, and high speed steel for industrial applications. The company, founded in 1928, is headquartered in Toyama, Japan.

• Single-row angular contact ball bearing, supporting moderate one-directional thrust loads, and combined loads where thrust load is predominant
• Ball contact angle of 30 degrees relative to the inner and outer raceways increases thrust load capacity
• Open configuration for lubrication applied in place
• Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise
• C3 axial internal clearance is larger than normal allowing for thermal expansion